I removed these from their plastic housing and trimmed the cardboard they rest on, but as you can see from the pictures, they have never even been removed from the original bungees. The R7008SB is the Perfect Rx for a complex multicopter offering the very latest 7 wire traditional outlets and also SBus and SBus 2 at the same time – you can connect the SBus 2 to your WookM and the SBus(1) to your Zenmuse for example without a hub. This Rx is included with a 14SG radio. FASSTest-2.4GHz system(18CH/12CH mode)/S. BUS port and 8 channels for conventional system receiver. Dual antenna diversity Size: 0.98 x 1.86 x 0.56 in. (24.9 x 47.3 x 14.3 mm). Weight: 0.38 oz. Power requirement: 3.7V to 7.4V(Voltage range: 3.5 to 8.4V). Battery F/S Voltage: It sets up with a transmitter. Extra Voltage port: 0 70V DC Be sure that when using ESCs regulated. Link to the transmitter. Easy Link ID allows FASSTest receivers to link to compatible transmitter without pressing the link button on the receiver. 1 Bring the transmitter and the receiver close to each other, within 20 inches (half meter). 2 Turn on the transmitter. Place the transmitter into the receiver linking mode. 3 Turn on the receiver. 4 The receiver will wait for the linking process to begin for 2 seconds. Following that it will return to the normal operation mode. 5 When the LED of the receiver changes from blinking red to solid green, linking is complete. A link waiting state is ended in 1 second. Refer to the transmitters operation manual for complete details on how to place the transmitter into the linking mode. If there are many FASSTest systems turned on in close proximity, your receiver might have difficulty establishing a link to your transmitter. This is a rare occurrence. However, should another FASSTest transmitter/receiver be linking at the same time, your receiver could link to the wrong transmitter. This is very dangerous if you do not notice this situation. In order to avoid the problem, we strongly recommend you to double check whether your receiver is really under control by your transmitter. If the System Type of the transmitter is changed, the receiver will need to be relinked to the transmitter. The R7008SB is capable of changing its channel allocations as described in the table below. This is especially important when using the receiver in a dual receiver mode. See your transmitter operation manual for complete details on operating in the dual receiver mode. 1 Press and hold down the Link/Mode button on the R7008SB receiver. 2 Turn the receiver on while holding down the Link/Mode button. After power up, the button can be released. 3 The LED should now be blinking red in one of the patterns described by the chart below. 4 Each press of the Mode/Link button advances the receiver to the next mode. 5 When you reach the mode that you wish to operate in, press and hold the Mode/Link button for more than 2 seconds. 6 Once locked into the correct mode the LED will change to a solid color. 7 Please cycle the receiver(s) power off and back on again after changing the Channel Mode. FASSTest is a bidirectional communication system between the R7008SB receiver and FASSTest capable transmitters. Multiple optional telemetry sensors may be connected to the S. BUS2 on the receiver and that data is in turn displayed on the transmitter. Please see your transmitters operation manual to configure transmitter to operate with telemetry sensors. BUS and supports bidirectional communication. Sensors are connected to the S. Bus2 capable devices may be connected to the S. Bus servos and gyros should not be connected to the S. The item “Futaba R7008SB S. Bus2 FASSTest Receiver 14SG/18MZ/18SZ” is in sale since Tuesday, July 10, 2018. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Receivers & Transmitters”. The seller is “basquesurfer” and is located in San Diego, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion.
- Frequency Band: 2.4GHz
- Brand: Futaba
- Model: R7008SB
- Type: Receiver
- Country/Region of Manufacture: Unknown
- Bundle Listing: No
- MPN: Does Not Apply
- Design: Console Transmitter