![Futaba 10PX 10-Channel 4G Telemetry Radio System with Receiver R404SBSx1 DHL TO US Futaba 10PX 10-Channel 4G Telemetry Radio System with Receiver R404SBSx1 DHL TO US](https://futabaradiocontrol.com/wp-content/image/Futaba_10PX_10_Channel_4G_Telemetry_Radio_System_with_Receiver_R404SBSx1_DHL_TO_US_01_hv.jpg)
![Futaba 10PX 10-Channel 4G Telemetry Radio System with Receiver R404SBSx1 DHL TO US Futaba 10PX 10-Channel 4G Telemetry Radio System with Receiver R404SBSx1 DHL TO US](https://futabaradiocontrol.com/wp-content/image/wuzuq.gif)
10PX Transmitter – Super Response Digital Proportional RC System. For Use with Surface Models (01004408-1) (01004409-1). Full color touch screen LCD. T10PX has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is trans? Ective which enables both indoor and outdoor visibility. F-4G system & telemetry. Equipped with an F-4G system that enables telemetry with faster response than the T-FHSS SR system. Up to 10 channels can be operated by using the S. By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. Model memory for 40 models. Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. Paddle switch + bottom switch + 3 position switch. A paddle switch near the wheel, a 3-position switch on the grip, and a bottom switch on the bottom are equipped to support multiple channels and functions. Lipo battery can be used. The optional LT2F2000B Lipo battery can be used as the transmitter power supply. The running time is extended. Brake mixing for large cars. Brake mixing of the front and rear wheels of 1/5GP and other large cars can be adjusted independently. Smooth cornering is possible by the independent left and right steering servo setting. 4WS mixing for crawlers and other 4WS type. This function can be used with crawlers and other 4-wheel steering type vehicles. Dual ESCs mixing for crawlers. ESC at the front and rear are controlled independently. The sensitivity of Futaba car rate gyros can be adjusted from the T10PX. This function is intended for vehicles such as tanks. Ashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. This is a special function that allows setting of the parameters of our S. BUS servo whose settings are changed by using PC Link software. This is a dedicated function which allows setting of the contents of the Link software which makes possible Futaba speed controller (ESC), MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. Variable frequency and other data changes by PC at the T10PX. Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. When you sense that the steering servo is too fast, etc. The servo operating speed (direction that suppresses the maximum speed) can be adjusted. When the telemetry function is OFF to con? Rm that the telemetry function is not operating. This function assigns functions to dials (digital trim, grip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. This function assigns functions to 10 switches. The operating direction can also be set. Wheel & Trigger position can be changed. The wheel position can be o? Set by using an accessory APA wheel position o? The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward. It is possible to convert to a narrow grip type by ex-changing the rubber grip. Lock functions which prohibit setting and operation by transmitter trim, and dials are provided. The left and right installation direction of the wheel section can be reversed. Vibrator built into the grip. The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. The transmitter can be used as a game controller by connecting it to a computer with a USB cable. Some games cannot be used. YOUR T10PX INCLUDES THE FOLLOWING COMPONENTS. R404SBS OR R404SBS-E Receiver. Wheel offset adapter two size (APA)APA Mounting screws Spare screws are also included. Wheel adapter 32 deg. Wheel Angle spacer 5 deg. Large diameter steering wheel. WHEEL SYSTEM, 10 CHANNELS (F-4G SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS SYSTEM. 2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP. LiPo – NLF2F2000B (7.4 V). LiFe – FT2F1700BV2 (6.6 V). 350 mA or less (When the T-FHSS, Vibration off, back lighting on). 4.3 INCH BACKLIT COLOR TFT LIQUID CRYSTAL TOUCH PANEL. When you turn on your 10PX, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology. 1.00×0.81×0.42 inch. 25.5×20.7×10.6 mm. DC 3.7-7.4V. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Receivers & Transmitters”. The seller is “bengalcat2013″ and is located in this country: TW. This item can be shipped worldwide.
- Brand: Futaba
- Type: Receiver & Transmitter Set
![Futaba 10PX 10-Channel 4G Telemetry Radio System with Receiver R404SBSx1 DHL TO US Futaba 10PX 10-Channel 4G Telemetry Radio System with Receiver R404SBSx1 DHL TO US](https://futabaradiocontrol.com/wp-content/image/wuzuq.gif)