We do not accept P. BOXES – PLEASE PROVIDE A PHYSICAL ADDRESS. We advise you to use a reputable carrier service when returning your goods. Please check the Voltage information and make sure it matches the one in your country. In case it’s not stated in the description, do ask us. We guarantee that your issue will be solved quickly. We usually respond within 24 hours on weekdays. The most affordable 2.4GHz surface system Futaba offers, the 3PRKA is an outstanding value in basic 2.4GHz control, whether you’re looking at it as an inexpensive start-up system or an economical upgrade for your RTR. It puts the interference-free dependability of Futaba FHSS (Frequency Hopping Spread Spectrum) technology at your fingertips. A convenient thumb dial lets you dial in steering on the go! Move it clockwise for more steering, or counterclockwise for less! Moves the throttle to a preset position if signal is lost or interrupted. Prevents runaways and lost vehicles? A flashing LED lets you know when battery voltage is low and it’s time for new batteries. The R203GF’s high-voltage (4.8V-7.4V) design gives you the freedom to use it with LiPo and LiFe packs as well as NiCd and NiMH packs. It’s ideal for FHSS systems such as the 3PRKA, but will also auto-adapt for flawless performance with Futaba S-FHSS systems. Throttle and steering trims & servo reversing. Steering dual rate dial. Throttle end point adjustment (EPA). 70:30 throttle mode. Transmitting Frequency: 2.4GHz band. Includes: 3-Channel R203GF Receiver. Current Drain: 100mA or less. Requires: (4) “AA” alkaline batteries. Input Power: 4.8V-7.4V. Dimensions: 1-9/16 x l-1/16 x 3/8 in (39 x 26 x 10 mm). Weight: 0.28 oz (8 g). Current Drain: 30mA at no signal. Operating Voltage: 4.8 – 7.4V (shared with servo). Battery Fail Safe Voltage: 3.8V. Note: Battery fail safe voltage is set for 4-cell NiCd/NiMH batteryBattery F/S does not work properly when other type of battery is used. Includes Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, InstructionManual and On/Off Switch. Requires servos of your choice and four AA batteries for transmitter. 2.4GHz FHSS is not compatible with FASST systems. Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any type of servos or peripherals. High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts digital servos including the BLS series and most peripheral equipment such as brushless ESCs. This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System with the R203GF Receiver. Ideal upgrade for radios found in RTR vehicles. Futaba 3PRKA 3-Channel 2.4GHz Radio FHSS System, Black.